REVOLUTIONARY FACIAL DEVICE

What's included?

MYSKINBUDDY Device Holding Stand USB Charger User Manual

001.
LIGHT EMITTING DIODE
(LED) THERAPY
RED, BLUE & GREEN
Red 630 nm
Blue 460 nm
Green 520 nm
The beneficial wavelengths of Light Emitting Diode Therapy (LED) have been proven and shown to improve the appearance of fine lines and wrinkles, fight bacteria that leads to acne, reduce redness and promote brightening and even skin tone.
002.
ION CARE
POSITIVE & NEGATIVE
MSB™ uses low level electrical current to gently cleanse and push ingredients deep in skin.
Positively-charged ions work to attract and pull impurities from the skin while negatively-charged ions enhance product penetration.
003.

ULTRASONIC VIBRATION
8500 PULSES PER MINUTE
The user is able to enjoy a soothing mini-massage while breaking up dead skin skills, lifting, firming and tightening the skin, while improving product penetration and absorption.
004.
HEAT THERAPY TEMPERATURE
OF 104° - 113° F
The combination of heat with the deep cleansing ions aids in emulsifying dirt and oil so that it can easily be swept away. Thermal heat therapy has also been shown to improve with skin tightening, promoting more oxygen to the cells by improving blood circulation and shrinking pore size.

Results may vary depending on skin type and skin care products used. For quality skin care, please consult with your skin care professional or locate an MSB Expert to purchase
SIX-READY-TO-GO SETTINGS
MYSKINBUDDY™ plays well with others! Compatible with All Skincare Lines.

        SETTING ONE - DEEP & GENTLE CLEANSING
Deep Cleansing and Exfoliation with Anti-Aging Benefits

 

 

TECHNOLOGIES                      
Red LED 630 nm
Positively-charged ions
Ultrasonic Vibration
THE BENEFITS
This setting lets you experience a gentle yet deep and squeaky clean.
Ultrasonic vibration gently breaks up dead skin cells, while the heat technology emulsifies sebum and softens debris.
Positively-charged ions gently pull the dirt out, as the Red LED helps oxygenate and detoxify the skin.
DIRECTIONS
Wet your skin and apply cleanser and/or facial scrub directly on face. You may also treat neck, hands and other body areas.
Click the button once for Setting One for Deep Cleansing mode. Gently cleanse in a slow and circular motion for up to 5 minutes.
Tip: If your cleanser begins to dry, add more water to skin. Rinse face when complete.
Hold the power button down for up to five seconds until device turns off. Clean device and surface with
alcohol wipes.
PRODUCT SUGGESTIONS
Cleansing Balm
Gentle Cleanser
Mild Exfoliating Scrub
Toner

 

BONUS FEATURE:
MAKE UP REMOVAL AND SKIN TONING WITH COTTON ROUND FEATURE

TECHNOLOGIES
Red LED 630 nm
Positively-charged ions
Ultrasonic Vibration
Thermal Heat
THE BENEFITS
This setting allows you to double cleanse, remove make up and tone skin.
DIRECTIONS
Remove most of your make up and pre-cleanse skin. See directions above from Deep & Gentle Setting.
Apply cotton round or square to metal head and secure in place with plastic cotton round feature.
Spritz your favorite toner on to cotton round or square.
Click the button once for Setting One for Deep Cleansing mode. Gently tone in a slow and circular motion for up to 2 minutes.
Hold the power button down for up to five seconds until device turns off. Clean device and surface with alcohol wipes.
PRODUCT SUGGESTIONS
Miscellar Water
Hydrating Mist
Oil-Control Toner

  SETTING TWO - ACNE CARE & PREVENTION
Acne Care and Prevention with Product Penetration

TECHNOLOGIES
Blue LED 460 nm
Negatively-charged ions
Ultrasonic Vibration
THE BENEFITS
This setting helps you achieve a clearer and brighter complexion with Blue LED.
Blue LED is a therapeutic wavelength that has been shown to kill P. acnes bacteria that leads to breakouts, and help control oil sebum. Ultrasonic vibration and negatively-charged ions will help infuse your ingredients deeper while stimulating skin cells for a more radiant and healthier glow.
DIRECTIONS
After cleansing skin, apply your skin care starting with water-based serums and finish with oil/cream-based moisturizers.
Click the button two (2) times for Setting Two for Acne Care &
Prevention, and treat area for up to five minutes using slow and circular movements.
Tip: For best glide, wait one minute after applying skin care products to allow ingredients to settle.
Hold the power button down for up to five seconds until device turns off.
Clean device and surface with alcohol wipes.
PRODUCT SUGGESTIONS
Acne Serum
Acne Lotion
Acne Spot Treatme

 SETTING THREE - CALMING & BRIGHTENING
Calming, Skin Brightening and Balancing Skin Tone with Product Penetration

TECHNOLOGIES
Green LED 520 nm
Negatively-charged ions
Ultrasonic Vibration
THE BENEFITS
This setting is optimal for individuals who suffer from hyperpigmentation and redness.
Green LED light therapy has been shown to help fade dark spots, brighten skin, and reduce redness. Take advantage of the added ions and ultrasonic vibrations in this mode, and use a lightening product suggested for your skin type to speed up the results.
DIRECTIONS
After cleansing skin, apply your skin care starting with water-based serums and finish with oil/cream-based moisturizers.
Click the button three (3) times for Setting 3 for Calming and
Brightening, and treat area for up to five minutes using slow and circular movements.
Tip: For best glide, wait one minute after applying skin care products to allow ingredients to settle.
Hold the power button down for up to five seconds until device turns off. Clean device and surface with
alcohol wipes.
PRODUCT SUGGESTIONS
Brightening Serum
Calming Serum
Soothing 
Moisturizer

 SETTING FOUR - SKIN REJUVENATION
Skin Rejuvenation and Anti-Aging with Product Infusion

TECHNOLOGIES
Red LED 630 nm
Negatively-charged ions
Ultrasonic Vibration
THE BENEFITS
This setting is for taking your serum and moisturizer to the next level.
The combination of Red LED therapy, ultrasonic vibrations, and ions will deeply infuse your skin care into the dermal layers for optimal nourishment while stimulating natural collagen production. Pay attention to how plump and radiant your skin will feel and look after the first treatment, and long-lasting results with continued use.
DIRECTIONS
After cleansing skin, apply your skin care starting with water-based serums and finish with oil/cream-based moisturizers.
Click the button four (4) times for Setting Four for Skin Rejuvenation, and treat area for up to five minutes using slow and circular movements.
Tip: For best glide, wait one minute after applying skin care products to allow ingredients to settle.
Hold the power button down for up to five seconds until device turns off. Clean device and surface with alcohol wipes.
PRODUCT SUGGESTIONS
Vitamin C Serum
Peptides Serum
Vitamin A Cream

  SETTING FIVE - MULTI-BENEFIT
Multi-Benefit Mode with Product Infusion. Skin Rejuvenation, Acne Care, Skin Brightening and Calming.

TECHNOLOGIES
Red LED 630 nm
Blue LED 460 nm
Green LED 520 nm
Negatively-charged ions
Ultrasonic Vibration
THE BENEFITS
This setting is If you’re running late and have more than one skin issue to treat.Target wrinkles, dark spots, and acne all at once. This setting uses three technologies and three light therapies, while boosting your skin care ingredients.
DIRECTIONS
After cleansing skin, apply your skin care starting with water-based serums and finish with oil/cream-based moisturizers. Click the button five (5) times for Setting 5 for Multi-Benefit Mode, and treat area for up to five minutes using slow and circular movements. Tip: For best glide, wait one minute after applying skin care products to allow ingredients to settle. Hold the power button down for up to five seconds until device turns off. Clean device and surface with alcohol wipes. 
PRODUCT SUGGESTIONS
Acne Serum
Soothing Lotion
Anti-Aging Cream

   SETTING 6 - (LED) LIGHT-FREE
(LED) Light-Free Mode with Product Infusion

TECHNOLOGIES
Negatively-charged ions
Ultrasonic Vibration
THE BENEFITS
Not in the mood for a disco of lights tonight. This setting offers an (LED) light-free option with ultrasonic vibration and negatively-charged ions to help you infuse your serum and moisturizers.
DIRECTIONS
After cleansing skin, apply your skin care starting with water-based serums and finish with oil/cream-based moisturizers.Click the button six (6) times for Setting Six for (LED) Light-Free Mode, and treat area for up to five minutes using slow and circular movements. Tip: For best glide, wait one minute after applying skin care products to allow ingredients to settle. Hold the power button down for up to five seconds until device turns off. Clean device and surface withalcohol wipes.
PRODUCT SUGGESTIONS
Night Serum
Soothing Lotion
Anti-Oxidant Cream